Easy to installLowers water billsCleaner water without chemicalsKinder to plantsSofter waterLow maintainanceNext delivery available
Why install a rainwater harvesting system?
If you're looking to create an eco friendly home or you're just looking to reduce your water bills then a rainwater havesting system is answer. You could dramatically reduce your mains water usage by install one of our systems. You can directly plumb rainwater to feed your toilet which will save you, on average, 8 litre per flush.
Rainwater System Benefits
Water Pump SpecificationHigh specification, extremely quiet, stainless steel bodied corrosion and rust proof pump, ideal for boosting or maintaining water pressure.Maximum Output 51 L/minMaximum head (lift height) 35MLonglife double insulated impeller24ltr Stainless Steel tankAuto start/stop to ensure continuity of water pressureOperating pressure 2-3.5 bar700 Watts, 230v 1ph motorPutting it all together
|Dimensions||H:1675mm x Dia:2150mm|
|Capacity||5000 litres / 1100 gal|
Connect your rainwater downpipe to the Ecosure underground water filter via underground pipework.
Using the other 4" outlet on the underground water filter, connect this to your Ecosure underground water tank using one of the pre-moulded 4" outlets in the tank (this will need to be drilled out).
Drill a hole near the top of water tank and feed the rainwater pipe into the tank.
Connect of the end of the rainwater pipe to water pump which should be installed in a dry places protected from frost.
From you pump you can now run pipes to where you require water.