|Super Complete Rainwater Harvesting System 10,000 Litres Ref: ECOSUPCOM10000|
Water Pump Specification
Putting it all together
Connect your rainwater downpipe to the Ecosure underground water filter via underground pipework.
Using the other 4" outlet on the underground water filter, connect this to your Ecosure underground water tank using one of the pre-moulded 4" outlets in the tank (this will need to be drilled out).
Drill a hole near the top of water tank and feed the rainwater pipe into the tank.
Connect of the end of the rainwater pipe to water pump which should be installed in a dry places protected from frost.
From you pump you can now run pipes to where you require water.