Super Complete Rainwater Harvesting System 2800 Litres
Super Complete Rainwater Harvesting System 2800 Litres  Ref: ECOSUPCOM 2800

Why install a rainwater harvesting system?
If you're looking to create an eco friendly home or you're just looking to reduce your water bills then a rainwater havesting system is answer. You could dramatically reduce your mains water usage by install one of our systems. You can directly plumb rainwater to feed your toilet which will save you, on average, 8 litre per flush.

Rainwater System Benefits
  • Easy to install
  • Lowers water bills
  • Cleaner water without chemicals
  • Kinder to plants
  • Softer water
  • Low maintainance
  • Next delivery available




  • Water Pump Specification
  • High specification, extremely quiet, stainless steel bodied corrosion and rust proof pump, ideal for boosting or maintaining water pressure.
  • Maximum Output 51 L/min
  • Maximum head (lift height) 35M
  • Longlife double insulated impeller
  • 24ltr Stainless Steel tank
  • Auto start/stop to ensure continuity of water pressure
  • Operating pressure 2-3.5 bar
  • 700 Watts, 230v 1ph motor


  • Putting it all together
    • Connect your rainwater downpipe to the Ecosure underground water filter via underground pipework.
    • Using the other 4" outlet on the underground water filter, connect this to your Ecosure underground water tank using one of the pre-moulded 4" outlets in the tank (this will need to be drilled out).
    • Drill a hole near the top of water tank and feed the rainwater pipe into the tank.
    • Connect of the end of the rainwater pipe to water pump which should be installed in a dry places protected from frost.
    • From you pump you can now run pipes to where you require water.